Organisation for Economic Co-operation and Development

AEO (African Economic Outlook) Country Notes Tables, 2015

AEO (African Economic Outlook) Statistical Annex, 2015

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

The following dataset presents seven bibliometric indicators by fields of science for the 2008-2022 period. The dataset covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

The OECD Science, Technology and Industry Outlook 2012 presents, in a series of country profiles, the main features, strengths and weaknesses of national STI systems and major recent changes in national STI policy. The statistical dimension of the country profiles has drawn on the work and empirical research conducted by the OECD on the measurement of innovation and the development of internationally comparable STI indicators for policy analysis.   

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

The classification of personnel is based on functions and organises staff into four main functional categories: 1) Instructional Personnel; including two sub-groups: A. Classroom Teachers (ISCED 0-4) and Academic Staff (ISCED 5-6); and B. Teacher Aides (ISCED 0-4) and Teaching / Research Assistants (ISCED 5-6); 2) Professional Support for Students; including two sub-groups: A. Pedagogical Support (ISCED 0-4) and Academic Support (ISCED 5-6); B. Health and Social Support (ISCED 0-6); 3) Management/Quality Control/Administration; including four subgroups: A. School Level Management (ISCED 0-6); B. Higher Level Management (ISCED 0-6); C. School Level Administrative Personnel (ISCED 0-6); and D. Higher Level Administrative Personnel (ISCED 0-6); 4) Maintenance and Operations Personnel.

Number of students enrolled in different education programmes by country of origin and sex.

Entrepreneurship is crucial to economic development, promoting social integration and reducing inequalities. The Gender-entrepreneurship dataset presents an original collection of indicators that measure gender equality in entrepreneurship, providing an important reference for policy insights and policy making. Data refer mainly to the self-employed, their profile, age, education and sector of activity.

Environmentally related taxes are effective policy instruments to shape relative prices of goods and services. The Environmental Related Tax Revenue Database (ERTR) categorises taxes based on their environmental relevance, constructing environmentally related tax revenue with a breakdown by tax-base category (including energy, transport, pollution, and resources) and 22 environmental domains. Note that tax-base categories are mutually exclusive, while domains are not. Therefore, one should not aggregate revenue across domains as it may lead to double counting.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

This dataset FDI flows by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by partner country for OECD reporting economies: Inward FDI flows by partner country measure the value of cross-border direct investment transactions received by the reporting economy during a year, by source country, enabling, for example, the identification of the major sources of FDI for a specific OECD economy in that year. Inward FDI flows are allocated to the immediate investing country. Outward FDI flows by partner country measure the value of cross-border direct investment transactions from the reporting economy during a year, by destination country or region, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy in that year. Outward FDI flows are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI flows by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI flows by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by economic activity for OECD reporting economies: Inward FDI flows by economic activity measure the value of cross-border direct investment transactions received by the reporting economy in a specific industry during a year, enabling, for example, the identification of the most attractive industries for FDI in each OECD economy in that year. Outward FDI flows by economic activity measure the value of cross-border direct investment transactions from the reporting economy during a year, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI flows are indicated in the metadata information attached at the country level). Inward and outward FDI flows by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. A cross-classification of inward and outward FDI flows by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies.

This dataset FDI income by counterpart area, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by partner country for OECD reporting economies:FDI income payments (or income on inward FDI) by partner country measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy to their foreign investors, by destination countries or regions, enabling, for example, the identification of the major destinations of FDI income payments for a specific OECD economy in that year. FDI income payments are allocated to the immediate counterpart country.FDi income receipts (or income on outward FDI) by partner country measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by source countries or region, enabling, for example, the identification of the major sources of FDI income receipts for a specific OECD economy in that year.. FDI income receipts are allocated to the immediate counterpart country or region for all OECD countries. Income payments and receipts (or income on inward and outward FDI respectively) by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI income by economic activity, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by economic activity for OECD reporting economies: FDI income payments (or income on inward FDI) by economic activity measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy, in a specific industry, to their foreign investors. FDi income receipts (or income on outward FDI) by economic activity measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for FDI income receipts are indicated in the metadata information attached at the country level). Income payments and receipts (or income on inward and outward FDI respectively) by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies.  Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The Future of Business Survey is an original source of information on small and medium-sized enterprises (SMEs). Launched in February 2016, the survey is a partnership between Facebook, OECD, and the World Bank. It provides timely information on business owners’ assessment of the current state and future outlook of their business, job creation perspectives, main business challenges and participation in international trade. Several data breakdowns are available, in particular by size of the enterprise, age, sector, trading status and gender of owners or managers.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This data set contains information of The insurance industry is a major component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays by covering personal and business risks. This annual report monitors global insurance market trends to support a better understanding of the insurance industry's overall performance and health.The OECD has collected and analysed data on insurance such as the number of insurance companies and employees, insurance premiums and investments by insurance companies dating back to the early 1980s. Over time, the framework of this exercise has expanded and now includes key balance sheet and income statement items for the direct insurance and reinsurance sector.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

Graduates are those who successfully complete an educational programme during the reference year of the data collection. One condition of a successful completion is that students should have enrolled in, and successfully completed, the final year of the corresponding educational programme, although not necessarily in the year of reference. Students who do not complete the final year of an educational programme, but later successfully complete a recognised "equivalency" examination based on knowledge learned outside of the education system, should not be counted as graduates. Successful completion is defined according to the graduation requirements established by each country: in some countries, completion occurs as a result of passing a final, curriculum-based examination or series of examinations. In other countries, completion occurs after a specific number of teaching hours has been accumulated (although completion of some or all of the course hours may also involve examinations).

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

The ICT Access and Usage by Households and Individuals database provides a selection of 92 indicators, based on the of 2nd revision of the OECD Model Survey on ICT Access and Usage by Households and Individuals.The selected indicators originate from two sources:1. An OECD data collection on the following OECD and accession countries or key partners: Australia, Brazil, Canada, Costa Rica, Chile, Colombia, Israel, Japan, Korea, Mexico, New Zealand, Switzerland, and the United States. Data collection methodology followed by these countries is available in each respective country metadata file.2. Eurostat Statistics on Households and Individuals for the OECD countries that are part of the European Statistical system. For those countries, indicators shown in this database refer to the original indicator as published by EUROSTAT -see the correspondence table-. Please refer to Eurostat methodology to access the methodological information.For all countries, breakdowns used correspond to those of EUROSTAT, unless otherwise stated in the metadata.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

NOTE FOR THIS DATA CUBEFor all indicators provided in this cube, value are expressed as percentage of Internet users.For each country (except for Costa Rica -see below-), the value of the indicators provided in this cube are based on data from the ICT Access and Usage by Households and Individuals database, and metadata and sources are strictly identical.Internet users generally relate to a recall period of 3 months or 12 months as indicated below. For exceptions, see the country metadata in the ICT Access and Usage by Households and Individuals database.For Australia, 12 months before 2014, 3 months from 2014 onwards.For Canada, Colombia and Japan, 12 months.For Israel, Costa Rica and the United States, 3 months.For New Zealand, 12 months in 2006.For Chile, Korea, Mexico, New Zeland (2006 excepted), Switzerland and Brazil: 1. For indicators starting with D1, I3 and I9, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.For Costa Rica, data are OECD estimates based on data provided by the National Institute of Statistics and Censuses and by the Ministry of Science, Technology and Telecommunications (MICITT), and for all the indicators, Internet users relate to a recall period of 3 months.For the remaining countries (all from Eurostat): 1. For indicators starting with D1, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

The OECD Digital Economy Outlook 2020 examines trends and analyses emerging opportunities and challenges in the digital economy. It highlights how OECD countries and partner economies are taking advantage of information and communication technologies (ICTs) and the Internet to meet their public policy objectives. Through comparative evidence, it informs policy makers of regulatory practices and policy options to help maximise the potential of the digital economy as a driver for innovation and inclusive growth.   This third edition of the OECD Digital Economy Outlook provides a holistic overview of converging trends, policy developments and data on both the supply and demand sides of the digital economy. It illustrates how the digital transformation is affecting economies and societies. Finally, it provides a special focus on how the COVID-19 pandemic is amplifying opportunities and challenges from the digital transformation.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The Agricultural Outlook has been prepared as a joint report by the Organisation for Economic Co-operation and Development (OECD) and the Food and Agriculture Organization (FAO) of the United Nations. The report provides a ten year forward looking, assessment of trends and prospects in the major temperate-zone agricultural commodity markets of biofuels, cereals, oilseeds and oilseed products, sugar, meat, fish and sea food, dairy products, cotton, roots and tubers and pulses. It is published annually, in the middle of the second quarter, as part of a continuing effort to promote informed discussion of emerging market and policy issues. The data used to develop the projections underlying the assessment are those available as of January 2023. The projections and assessments provided in the report are the result of close co-operation between the OECD and FAO Secretariats and national experts with a jointly developed modelling system, based on the AGLINK-COSIMO model, used to facilitate consistency in the projections. The data series for the projections are drawn from OECD and FAO databases. For the most part information in these databases has been taken from national statistical sources. For further details on particular series, enquiries should be directed to the OECD and FAO Secretariats.

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

Private transactions are those undertaken by firms and individuals resident in the reporting country.

This dataset presents activities in support of development from philanthropic foundations since 2009, including bilateral activities and core contributions to multilateral organisations. Bilateral activities from this dataset can also be found in the Creditor Reporting System (CRS) database. Collecting data on private philanthropy for development is work in progress, which may explain break in series for some foundations.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable data on both tax and non-tax revenue in a common format for African countries participating in Revenue Statistics in Africa. Click to collapse Direct source Country representatives authorized to obtain revenue data from the appropriate government departments and responsible for compiling the data and preparing data tables that adhere to the OECD tax classification.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

For data aligned to Finance, the year shown is the calendar year. For data aligned to personnel, the year shown is the year in which the end of the school year falls (e.g. 2002 refers to the school year 2001/2002), with the exceptions of Korea where the year refers to the year in which the school year begins and Australia and New Zealand where the school academic year corresponds to the calendar year.

Survey on Monitoring the Paris Declaration. The dataset contains data as reported by donors and national co-ordinators in participating partner countries. The dataset includes all quantitative data collected through the 2006, 2008 and 2011 Surveys.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

This indicator reports the import-weighted applied tariffs on environmentally related goods as defined in the Combined List of Environmental Goods (CLEG) in percentage points for all countries between 2003 and 2016.

Official Development Financing (ODF), measured for recipient countries only, is defined as the sum of their receipts of bilateral ODA, concessional and non-concessional resources from multilateral sources, and bilateral other official flows made available for reasons unrelated to trade, in particular loans to refinance debt.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.

This indicator reports the amount of exports and imports of environmentally-related goods as defined in the Combined List of Environmental Goods (CLEG) in current USD for all countries between 2003 and 2016.

The indicator reports the amount of exports and imports of waste and scrap as defined in Kellenberg (2012) in current USD and in kilograms for all countries between 2003 and 2016.

Uranium is the raw material used to produce fuel for long-lived nuclear power facilities, necessary for the generation of significant amounts of baseload low-carbon electricity for decades to come. Although a valuable commodity, declining market prices for uranium in recent years, driven by uncertainties concerning the evolution in the use of nuclear power, have led to significant production cutbacks and the postponement of mine development plans in a number of countries and to some questions being raised about future uranium supply.

World Indicators of Skills for Employment (WISE) provide a comprehensive system of information relating to skills development. WISE presents countries with data upon which they can design skills policies and programs and monitor their impact on key outcomes, including responsiveness to current and emerging patterns of labour market demand, employability, productivity, health status, gender equity and lifelong learning.The database covers the period from 1990 to the present and consists of five inter-related domains of indicators:Contextual factors drive both the supply of and demand for skills.Skill acquisition covers investments in skills, the stock of human capital and its distribution.Skill requirements measure the demand for skills arising in the labour market.The degree of matching captures how well skills obtained through education and training correspond to the skills required in the labour market.Outcomes reflect the impact of skills on economic performance and employment and social outcomes.