Southern

Botswana: Agriculture Statistics

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

Structural business statistics (SBS) describes the structure, conduct and performance of economic activities, down to the most detailed activity level (several hundred economic sectors). SBS are transmitted annually by the EU Member States on the basis of a legal obligation from 1995 onwards.   SBS covers all activities of the business economy with the exception of agricultural activities and personal services and the data are provided by all EU Member States, Norway and Switzerland, some candidate and potential candidate countries. The data are collected by domain of activity (annex) : Annex I - Services, Annex II - Industry, Annex III - Trade and Annex IV- Constructions and by datasets. Each annex contains several datasets as indicated in the SBS Regulation. The majority of the data is collected by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources. Regulatory or controlling national offices for financial institutions or central banks often provide the information required for the financial sector (NACE Rev 2 Section K / NACE Rev 1.1 Section J). Member States apply various statistical methods, according to the data source, such as grossing up, model based estimation or different forms of imputation, to ensure the quality of SBSs produced. Main characteristics (variables) of the SBS data category: Business Demographic variables (e.g. Number of enterprises)"Output related" variables (e.g. Turnover, Value added)"Input related" variables: labour input (e.g. Employment, Hours worked); goods and services input (e.g. Total of purchases); capital input (e.g. Material investments) All SBS characteristics are published on Eurostat’s website by tables and an example of the existent tables is presented below: Annual enterprise statistics: Characteristics collected are published by country and detailed on NACE Rev 2 and NACE Rev 1.1 class level (4-digits). Some classes or groups in 'services' section have been aggregated.Annual enterprise statistics broken down by size classes: Characteristics are published by country and detailed down to NACE Rev 2 and NACE Rev 1.1 group level (3-digits) and employment size class. For trade (NACE Rev 2 and NACE Rev 1.1 Section G) a supplementary breakdown by turnover size class is available.Annual regional statistics: Four characteristics are published by NUTS-2 country region and detailed on NACE Rev 2 and NACE Rev 1.1 division level (2-digits) (but to group level (3-digits) for the trade section). More information on the contents of different tables: the detail level and breakdowns required starting with the reference year 2008 is defined in Commission Regulation N° 251/2009. For previous reference years it is included in Commission Regulations (EC) N° 2701/98 and amended by Commission Regulation N°1614/2002 and Commission Regulation N°1669/2003. Several important derived indicators are generated in the form of ratios of certain monetary characteristics or per head values. A list with the available derived indicators is available below in the Annex.

A case of non-fatal occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident not leading to death. The non-fatal occupational injury entails a loss of working time. Data on occupational injuries are disaggregated according to whether the injuries were (1) fatal (as a result of occupational accidents and where death occurred within one year of the day of the accident) or (2) non fatal with lost workdays. For non-fata injuries, data are also available disaggregated by type of incapacity, reflecting (1) cases of permanent incapacity for work (where the persons injured were never again able to perform the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury) and (2) cases of temporary incapacity (where the workers injured were unable to work from the day after the day of the accident, but were again able to perform the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury within a period of one year from the day of the accident). For more information, refer to the Occupational Safety and Health Statistics (OSH) database description.

A case of non-fatal occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident not leading to death. The non-fatal occupational injury entails a loss of working time. Data on occupational injuries are disaggregated according to whether the injuries were (1) fatal (as a result of occupational accidents and where death occurred within one year of the day of the accident) or (2) non fatal with lost workdays. For non-fata injuries, data are also available disaggregated by type of incapacity, reflecting (1) cases of permanent incapacity for work (where the persons injured were never again able to perform the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury) and (2) cases of temporary incapacity (where the workers injured were unable to work from the day after the day of the accident, but were again able to perform the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury within a period of one year from the day of the accident). Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Occupational Safety and Health Statistics (OSH) database description.

Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.

Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.

Collect the cost of Consulting Services, diagnostics services and clinical procedures. If you are residing in Major cities/towns where you have both Public and Private Healthcare services, you can join this project and earn money.

Global growth is forecast at 3.5 percent in 2015 and 3.8 percent in 2016, with uneven prospects across the main countries and regions of the world. The distribution of risks to near-term global growth has become more balanced relative to the October World Economic Outlook but is still tilted to the downside. The decline in oil prices could boost activity more than expected. Geopolitical tensions continue to pose threats, and risks of disruptive shifts in asset prices remain relevant. In some advanced economies, protracted low inflation or deflation also pose risks to activity. The chapter takes a region-by-region look at the recent development in the world economy and the outlook for 2015, with particular attention to notable development in countries within each region.

Monthly data on crude oil imports by country and by oil type in Japan.

Bahrain: Demographic and social Statistics The dataset provided by the iGA via http://www.data.gov.bh and terms of use available at http://www.data.gov.bh/en/TermsOfUse . To the full extent permitted by law the iGA is not liable for any damage or loss of any kind caused directly or indirectly by the use of the datasets or any derived analyses or application

Data cited at: https://egypt.opendataforafrica.org/wjsacpb Distribution Number of employees and private sector investment in Egypt, according to nationality and type of hiring foreigners

Calculated using Mean Years of Schooling and Expected Years of Schooling.

Data cited at: https://botswana.opendataforafrica.org/BWND2016V1 Botswana: Environment Statistics, 2015

Establishments National and Sub-National, 2013

Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information. COD data refer to the underlying cause which - according to the World Health Organisation (WHO) - is "the disease or injury which initiated the train of morbid events leading directly to death, or the circumstances of the accident or violence which produced the fatal injury". Causes of death are classified by the 86 causes of the "European shortlist" of causes of death. This shortlist is based on the International Statistical Classification of Diseases and Related Health Problems (ICD). COD data are derived from death certificates. The medical certification of death is an obligation in all Member States. Countries code the information provided in the medical certificate of cause of death into ICD codes according to the rules specified in the ICD. Data are broken down by sex, 5-year age groups, cause of death and by residency and country of occurrence. For stillbirths and neonatal deaths additional breakdows might include age of mother. Data are available for EU-28, the former Yugoslav Republic of Macedonia, Albania, Iceland, Norway, Liechtenstein and Switzerland. Regional data (NUTS level 2) are available for most of the countries. Annual national data are provided in absolute number, crude death rates and standardised death rates. At regional level (NUTS level 2) the same is provided in form of 3 years averages. Annual crude death rates are also available at NUTS level 2.

 

The data is given for the months January to August which corresponds to the year 2015.

Structural business statistics (SBS) describes the structure, conduct and performance of economic activities, down to the most detailed activity level (several hundred economic sectors). SBS are transmitted annually by the EU Member States on the basis of a legal obligation from 1995 onwards.   SBS covers all activities of the business economy with the exception of agricultural activities and personal services and the data are provided by all EU Member States, Norway and Switzerland, some candidate and potential candidate countries. The data are collected by domain of activity (annex) : Annex I - Services, Annex II - Industry, Annex III - Trade and Annex IV- Constructions and by datasets. Each annex contains several datasets as indicated in the SBS Regulation. The majority of the data is collected by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources. Regulatory or controlling national offices for financial institutions or central banks often provide the information required for the financial sector (NACE Rev 2 Section K / NACE Rev 1.1 Section J). Member States apply various statistical methods, according to the data source, such as grossing up, model based estimation or different forms of imputation, to ensure the quality of SBSs produced. Main characteristics (variables) of the SBS data category: Business Demographic variables (e.g. Number of enterprises)"Output related" variables (e.g. Turnover, Value added)"Input related" variables: labour input (e.g. Employment, Hours worked); goods and services input (e.g. Total of purchases); capital input (e.g. Material investments) All SBS characteristics are published on Eurostat’s website by tables and an example of the existent tables is presented below: Annual enterprise statistics: Characteristics collected are published by country and detailed on NACE Rev 2 and NACE Rev 1.1 class level (4-digits). Some classes or groups in 'services' section have been aggregated.Annual enterprise statistics broken down by size classes: Characteristics are published by country and detailed down to NACE Rev 2 and NACE Rev 1.1 group level (3-digits) and employment size class. For trade (NACE Rev 2 and NACE Rev 1.1 Section G) a supplementary breakdown by turnover size class is available.Annual regional statistics: Four characteristics are published by NUTS-2 country region and detailed on NACE Rev 2 and NACE Rev 1.1 division level (2-digits) (but to group level (3-digits) for the trade section). More information on the contents of different tables: the detail level and breakdowns required starting with the reference year 2008 is defined in Commission Regulation N° 251/2009. For previous reference years it is included in Commission Regulations (EC) N° 2701/98 and amended by Commission Regulation N°1614/2002 and Commission Regulation N°1669/2003. Several important derived indicators are generated in the form of ratios of certain monetary characteristics or per head values. A list with the available derived indicators is available below in the Annex.

Bahrain Census Data The dataset provided by the iGA via http://www.data.gov.bh and terms of use available at http://www.data.gov.bh/en/TermsOfUse . To the full extent permitted by law the iGA is not liable for any damage or loss of any kind caused directly or indirectly by the use of the datasets or any derived analyses or application

The tables presented in the topic of active population cover the total population for 31 countries (for more information on received tables and geographic coverage, see "2001 Census Round - Tables Received" in the Annex at the bottom of the page). The level of completeness of the tables depends largely on the availability of data at the respective national statistical institutes. There are four ways of collecting census data, namely: - the traditional method of using census questionnaires (exhaustive census); - the method of using registers and/or other administrative sources; - a combination of registers and/or other administrative sources and - surveys (complete enumerations or sample surveys). Other methods (other mixed census or micro-census) can be used as well. Details for the method employed by each country are provided in "2001 Census Method"in the Annex at the bottom of the page. In the same table you can find the dates on which the census was carried out in each country.

The “Business services statistics” (BS) collection contains harmonised statistics on business services. BS is a driver of the knowledge-based economy and their labour-intensive nature has attracted interest in their potential as providers of new jobs in the future. Contributing to the recent increase in the demand for business services, the growing trend in outsourcing has seen many enterprises use service providers for non-core professional activities. Technological progress and the Internet are also important factors which have provided new production possibilities and new modes of supply. Due to its growing importance, BS data are collected since 2000 reference year. The data were collected under Gentlemen agreement until 2007 reference year and from 2008 onwards it become part of the regular mandatory annual data collection of SBS. The BS’s data requirements before 2008 reference year included more variables, but data is available only for a small number of countries. The following variables are available until 2007 reference year:Number of enterprisesTurnover or gross premiums writtenValue added at factor costPersonnel costsNumber of persons employedNumber of employeesNumber of part-time employees The “Turnover or gross premiums written” variable is broken down by product and residence of client. In addition, there is information on the turnover shares of product and client specialised enterprises. The statistics on “Turnover by product” permits analyses on each product's relative importance in the turnover, consistency of product level statistics and product specialisation. On the other hand, information on “Turnover by client” enables analyses on type and location of client and client specialisation. The economic variables make it possible to extend the analysis to productivity and personnel cost issues. From 2008 onwards, the BS’s data requirements are only for variable “Turnover” broken down by products and by type of residence of client. The majority of the data is collected annually by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources.

The “Business services statistics” (BS) collection contains harmonised statistics on business services. BS is a driver of the knowledge-based economy and their labour-intensive nature has attracted interest in their potential as providers of new jobs in the future. Contributing to the recent increase in the demand for business services, the growing trend in outsourcing has seen many enterprises use service providers for non-core professional activities. Technological progress and the Internet are also important factors which have provided new production possibilities and new modes of supply. Due to its growing importance, BS data are collected since 2000 reference year. The data were collected under Gentlemen agreement until 2007 reference year and from 2008 onwards it become part of the regular mandatory annual data collection of SBS. The BS’s data requirements before 2008 reference year included more variables, but data is available only for a small number of countries. The following variables are available until 2007 reference year: Number of enterprisesTurnover or gross premiums writtenValue added at factor costPersonnel costsNumber of persons employedNumber of employeesNumber of part-time employees The “Turnover or gross premiums written” variable is broken down by product and residence of client. In addition, there is information on the turnover shares of product and client specialised enterprises. The statistics on “Turnover by product” permits analyses on each product's relative importance in the turnover, consistency of product level statistics and product specialisation. On the other hand, information on “Turnover by client” enables analyses on type and location of client and client specialisation. The economic variables make it possible to extend the analysis to productivity and personnel cost issues. From 2008 onwards, the BS’s data requirements are only for variable “Turnover” broken down by products and by type of residence of client. The majority of the data is collected annually by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources.

The “Business services statistics” (BS) collection contains harmonised statistics on business services. BS is a driver of the knowledge-based economy and their labour-intensive nature has attracted interest in their potential as providers of new jobs in the future. Contributing to the recent increase in the demand for business services, the growing trend in outsourcing has seen many enterprises use service providers for non-core professional activities. Technological progress and the Internet are also important factors which have provided new production possibilities and new modes of supply. Due to its growing importance, BS data are collected since 2000 reference year. The data were collected under Gentlemen agreement until 2007 reference year and from 2008 onwards it become part of the regular mandatory annual data collection of SBS. The BS’s data requirements before 2008 reference year included more variables, but data is available only for a small number of countries. The following variables are available until 2007 reference year: Number of enterprisesTurnover or gross premiums writtenValue added at factor costPersonnel costsNumber of persons employedNumber of employeesNumber of part-time employees The “Turnover or gross premiums written” variable is broken down by product and residence of client. In addition, there is information on the turnover shares of product and client specialised enterprises. The statistics on “Turnover by product” permits analyses on each product's relative importance in the turnover, consistency of product level statistics and product specialisation. On the other hand, information on “Turnover by client” enables analyses on type and location of client and client specialisation. The economic variables make it possible to extend the analysis to productivity and personnel cost issues. From 2008 onwards, the BS’s data requirements are only for variable “Turnover” broken down by products and by type of residence of client. The majority of the data is collected annually by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources.

The “Business services statistics” (BS) collection contains harmonised statistics on business services. BS is a driver of the knowledge-based economy and their labour-intensive nature has attracted interest in their potential as providers of new jobs in the future. Contributing to the recent increase in the demand for business services, the growing trend in outsourcing has seen many enterprises use service providers for non-core professional activities. Technological progress and the Internet are also important factors which have provided new production possibilities and new modes of supply. Due to its growing importance, BS data are collected since 2000 reference year. The data were collected under Gentlemen agreement until 2007 reference year and from 2008 onwards it become part of the regular mandatory annual data collection of SBS. The BS’s data requirements before 2008 reference year included more variables, but data is available only for a small number of countries. The following variables are available until 2007 reference year:Number of enterprisesTurnover or gross premiums writtenValue added at factor costPersonnel costsNumber of persons employedNumber of employeesNumber of part-time employees The “Turnover or gross premiums written” variable is broken down by product and residence of client. In addition, there is information on the turnover shares of product and client specialised enterprises. The statistics on “Turnover by product” permits analyses on each product's relative importance in the turnover, consistency of product level statistics and product specialisation. On the other hand, information on “Turnover by client” enables analyses on type and location of client and client specialisation. The economic variables make it possible to extend the analysis to productivity and personnel cost issues. From 2008 onwards, the BS’s data requirements are only for variable “Turnover” broken down by products and by type of residence of client. The majority of the data is collected annually by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources.

The “Business services statistics” (BS) collection contains harmonised statistics on business services. BS is a driver of the knowledge-based economy and their labour-intensive nature has attracted interest in their potential as providers of new jobs in the future. Contributing to the recent increase in the demand for business services, the growing trend in outsourcing has seen many enterprises use service providers for non-core professional activities. Technological progress and the Internet are also important factors which have provided new production possibilities and new modes of supply. Due to its growing importance, BS data are collected since 2000 reference year. The data were collected under Gentlemen agreement until 2007 reference year and from 2008 onwards it become part of the regular mandatory annual data collection of SBS. The BS’s data requirements before 2008 reference year included more variables, but data is available only for a small number of countries. The following variables are available until 2007 reference year:Number of enterprisesTurnover or gross premiums writtenValue added at factor costPersonnel costsNumber of persons employedNumber of employeesNumber of part-time employees The “Turnover or gross premiums written” variable is broken down by product and residence of client. In addition, there is information on the turnover shares of product and client specialised enterprises. The statistics on “Turnover by product” permits analyses on each product's relative importance in the turnover, consistency of product level statistics and product specialisation. On the other hand, information on “Turnover by client” enables analyses on type and location of client and client specialisation. The economic variables make it possible to extend the analysis to productivity and personnel cost issues. From 2008 onwards, the BS’s data requirements are only for variable “Turnover” broken down by products and by type of residence of client. The majority of the data is collected annually by National Statistical Institutes (NSIs) by means of statistical surveys, business registers or from various administrative sources.

The Yearbook of Immigration Statistics is a compendium of tables that provides data on foreign nationals who, during a fiscal year, were granted lawful permanent residence (i.e., admitted as immigrants or became legal permanent residents), were admitted into the United States on a temporary basis (e.g., tourists, students, or workers), applied for asylum or refugee status, or were naturalized.

Vineyard acreage is based on United Nations Food & Agriculture Organization (FAO) data, Eurostat data and estimates and reports from individual countries. It includes vineyards used for the production of wine variety grapes, raisin variety grapes, table grapes (for the fresh market) and juice grapes (for the production of grape juice and grape juice concentrate). Wine consumption includes data for 225 countries during the period 2011-2014. Consumption has been estimated by TDA by aggregating the exports of the major wine producing countries to each individual country. The aggregation includes 41 countries including the EU 28, Argentina, Australia, Canada, China, Chile, Hong Kong, New Zealand, Singapore, South Africa, South Korea, Ukraine, United States, and Uruguay. The November 2015 revision pertains to Sweden. Wine production quantity indicated for China does not include the production of Chinese yellow wine; quantity indicated for Japan does not include the production of Sake; quantity indicated for Korea does not include the production of fruit wine and rice wine.

لا يوجد وصف متاح