Organisation for Economic Co-operation and Development

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

Number of students enrolled in different education programmes by country of origin and sex.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing sector or in the total business sector. The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

Private transactions are those undertaken by firms and individuals resident in the reporting country.

OECD has extracted monthly trade data from the UN Monthly Comtrade database, and aggregates the quarterly and annual frequencies by summing up the months. This may create discrepancies with annual trade figures as presented in International Trade by Commodity Statistics (ITCS). UN Monthly Comtrade (beta version) contains detailed merchandise trade data provided by countries (or areas) to the United Nations Statistics Division, Department of Economic and Social Affairs (UNSD/DESA). Values are expressed in United States dollars (USD) and refer to declared transaction values. All exports are valued f.o.b. (free on board) and imports are valued c.i.f. (including cost, insurance, freight), except the imports of Canada and Mexico which are valued f.o.b. Detailed country metadata (currency conversion rates, information in HS classifications and data publication dates) can be found from the metadata file at the UN Monthly Comtrade website under the heading Metadata.

Survey on Monitoring the Paris Declaration. The dataset contains data as reported by donors and national co-ordinators in participating partner countries. The dataset includes all quantitative data collected through the 2006, 2008 and 2011 Surveys.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.