كمبوديا

This data collection covers data on the steel industry, which is defined as group 27.1 of the Statistical classification of economic activities in the European Community (NACE Rev.1.1). For the first reference year 2003 the Commission will accept that the population covered refers to group 27.1 of NACE Rev.1. The statistics collected on the steel industry are: Annual statistics on the steel and cast iron scrap balance sheetAnnual statistics on the fuel and energy consumption broken down by type of plantAnnual statistics on the balance sheet for electrical energy in the steel industryAnnual statistics on investment expenditure in the iron and steel industryAnnual statistics on the maximum possible (and actual) production in the iron and steel industry The characteristics are defined in the Commission Regulation No 772/2005 of 20 May 2005 concerning the specifications for the coverage of the characteristics and the definition of the technical format for the production of annual Community statistics on steel for the reference years 2003 to 2009 (See annex at the bottom of the page). Member States of which the Steel industry (NACE Rev.1.1 27.1) represents less than 1% of the Community total need not to collect the characteristics of European Parliament and Council Regulation No 48/2004 (See annex at the bottom of the page). Steel Statistics data are collected by National Statistical Institutes (NSI) or by national federations of the Steel industry. Iron and steel data collection was discontinued from 2010 onwards.

This data collection covers data on the steel industry, which is defined as group 27.1 of the Statistical classification of economic activities in the European Community (NACE Rev.1.1). For the first reference year 2003 the Commission will accept that the population covered refers to group 27.1 of NACE Rev.1. The statistics collected on the steel industry are: Annual statistics on the steel and cast iron scrap balance sheetAnnual statistics on the fuel and energy consumption broken down by type of plantAnnual statistics on the balance sheet for electrical energy in the steel industryAnnual statistics on investment expenditure in the iron and steel industryAnnual statistics on the maximum possible (and actual) production in the iron and steel industry The characteristics are defined in the Commission Regulation No 772/2005 of 20 May 2005 concerning the specifications for the coverage of the characteristics and the definition of the technical format for the production of annual Community statistics on steel for the reference years 2003 to 2009 (See annex at the bottom of the page). Member States of which the Steel industry (NACE Rev.1.1 27.1) represents less than 1% of the Community total need not to collect the characteristics of European Parliament and Council Regulation No 48/2004 (See annex at the bottom of the page). Steel Statistics data are collected by National Statistical Institutes (NSI) or by national federations of the Steel industry. Iron and steel data collection was discontinued from 2010 onwards.

This data collection covers data on the steel industry, which is defined as group 27.1 of the Statistical classification of economic activities in the European Community (NACE Rev.1.1). For the first reference year 2003 the Commission will accept that the population covered refers to group 27.1 of NACE Rev.1. The statistics collected on the steel industry are: Annual statistics on the steel and cast iron scrap balance sheetAnnual statistics on the fuel and energy consumption broken down by type of plantAnnual statistics on the balance sheet for electrical energy in the steel industryAnnual statistics on investment expenditure in the iron and steel industryAnnual statistics on the maximum possible (and actual) production in the iron and steel industry The characteristics are defined in the Commission Regulation No 772/2005 of 20 May 2005 concerning the specifications for the coverage of the characteristics and the definition of the technical format for the production of annual Community statistics on steel for the reference years 2003 to 2009 (See annex at the bottom of the page). Member States of which the Steel industry (NACE Rev.1.1 27.1) represents less than 1% of the Community total need not to collect the characteristics of European Parliament and Council Regulation No 48/2004 (See annex at the bottom of the page). Steel Statistics data are collected by National Statistical Institutes (NSI) or by national federations of the Steel industry. Iron and steel data collection was discontinued from 2010 onwards.

This dataset is updated with data obtained from Statistics Canada and the U.S. Census Bureau. Trade Data is updated on a monthly and annual basis, with revisions in March, April, May, August and November to previous year's data. Trade Data is available on both product and industry-based versions. The product Trade Data is classified by Harmonized System (HS) codes while the industry data is based on North American Industry Classification System(NAICS) classification codes. Source: Statistics Canada and the U.S.Census Bureau

This dataset provides detailed trade statistics on iron and steel commodities using the Harmonized System (HS) classification of goods (based on the 6-digit commodity level).

This data collection covers data on the steel industry, which is defined as group 27.1 of the Statistical classification of economic activities in the European Community (NACE Rev.1.1). For the first reference year 2003 the Commission will accept that the population covered refers to group 27.1 of NACE Rev.1. The statistics collected on the steel industry are: Annual statistics on the steel and cast iron scrap balance sheetAnnual statistics on the fuel and energy consumption broken down by type of plantAnnual statistics on the balance sheet for electrical energy in the steel industryAnnual statistics on investment expenditure in the iron and steel industryAnnual statistics on the maximum possible (and actual) production in the iron and steel industry The characteristics are defined in the Commission Regulation No 772/2005 of 20 May 2005 concerning the specifications for the coverage of the characteristics and the definition of the technical format for the production of annual Community statistics on steel for the reference years 2003 to 2009 (See annex at the bottom of the page). Member States of which the Steel industry (NACE Rev.1.1 27.1) represents less than 1% of the Community total need not to collect the characteristics of European Parliament and Council Regulation No 48/2004 (See annex at the bottom of the page). Steel Statistics data are collected by National Statistical Institutes (NSI) or by national federations of the Steel industry. Iron and steel data collection was discontinued from 2010 onwards.

The Global Trade Alert (GTA) was launched in June 2009 when it was feared that the global financial crisis would lead governments to adopt widespread 1930s-style beggar-thy-neighbour policies. Although global in scope, the GTA has given particular attention to the policy choices of the G-20 governments ever since their leaders made a “no protectionism” pledge in Washington DC in November 2008. Although initially conceived as a trade policy monitoring initiative, as thousands of policy announcements have been documented, the GTA has become a widely-used input for analysis and decision-making by firms, industry associations, journalists, researchers, international organisations, and governments. This reflects the fact that, as the International Monetary Fund noted in 2016, the GTA “has the most comprehensive coverage of all types of trade-discriminatory and trade liberalizing measures.”   Data Cited at: https://www.globaltradealert.org

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

US Trade By Commodity (HS), All commodities from chapter 73 Note:- For commodity "7323930080 - Household Articles, Stainless Steel, Nesoi & Parts" unit is different for exports and imports. The unit for exports and Imports are  Kilogram and Number respectively.For commodity " 7319901000 - Sewing, Darning Or Embroidery Needles, Iron Or Stl" we have data only for imports and unit is thousand and for Export Quantity Unit is "X".If a commodity has unit as “X” and “Blank” then there is no quantity data provided for the commodity. This happens when US government does not want to disclose the quantity to the Exporter or Importer. Since there is no quantity available, unit price calculations can not be provided.  

US trade, at district level, of Iron and Steel:   Total Exports: -The sum of domestic and foreign exports. Domestic Exports : -Exports of goods that are grown, produced, or manufactured in the United States and commodities of foreign origin that have been changed in the United States, including changes made in a US Foreign Trade Zone, from the form in which they were imported, or which have been enhanced in value by further processing or manufacturing in the United States. Foreign Exports: -Exports of foreign goods (re-exports) consist of commodities of foreign origin that have previously been admitted to US Foreign Trade Zones or entered the United States for consumption, including entry into a CBP bonded warehouse, and which, at the time of exportation, are in substantially the same condition as when imported.   Note: Data is available from 2013 onward.