النمسا

This dataset is updated with data obtained from Statistics Canada and the U.S. Census Bureau. Trade Data is updated on a monthly and annual basis, with revisions in March, April, May, August and November to previous year's data. Trade Data is available on both product and industry-based versions. The product Trade Data is classified by Harmonized System (HS) codes while the industry data is based on North American Industry Classification System(NAICS) classification codes. Source: Statistics Canada and the U.S.Census Bureau

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

The table shows the Member States' contribution to the extra-EU27 (from 2020) trade for that product group. Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Please refer the latest version here : https://knoema.com/UNIDOISR2022/industrial-statistics-database-indstat-4-2022-isic-revision-4 The UNIDO Industrial Statistics Database at the 2-digit level of ISIC (INDSTAT2) contains disaggregated data on the manufacturing sector. 

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Note: Worldsteel's Steel Statistical Yearbook for 2019 and 2020 are concise version World steel's Steel Statistical Yearbook presents a cross-section of steel industry statistics. It contains comprehensive statistics from 2008 to 2022 on crude steel production by country and process, steel production by product, steel trade by product, apparent steel use and apparent steel use per capita by country, as well as production and trade of pig iron and directly reduced iron. It also includes data on production and trade of iron ore and trade of scrap.  of steel and true steel use. The statistics were collected from members of world steel and various international organizations.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

The indicator measures the quantities of selected waste categories and by-products that are shipped between the EU Members States (intra-EU) and across the EU borders (extra-EU). Five classes have been selected: plastic; paper and carboard; precious metal; iron and steel; copper, aluminiun and nickel. The indicator includes the following variables: • Intra EU trade of recyclable raw materials (measured as the Imports from EU countries). • Imports from non-EU countries and exports to non-EU countries of recyclable raw materials (as regards extra-EU trade). The indicator is based on International Trade in Goods Statistics (ITGS) published by Eurostat. The scope of the “recyclable raw materials” is measured in terms of relevant product codes from the Combined Nomenclature used in International Trade in Goods Statistics (see list of codes selected).

US Trade By Commodity (HS), All commodities from chapter 73 Note:- For commodity "7323930080 - Household Articles, Stainless Steel, Nesoi & Parts" unit is different for exports and imports. The unit for exports and Imports are  Kilogram and Number respectively.For commodity " 7319901000 - Sewing, Darning Or Embroidery Needles, Iron Or Stl" we have data only for imports and unit is thousand and for Export Quantity Unit is "X".If a commodity has unit as “X” and “Blank” then there is no quantity data provided for the commodity. This happens when US government does not want to disclose the quantity to the Exporter or Importer. Since there is no quantity available, unit price calculations can not be provided.  

US trade, at district level, of Iron and Steel:   Total Exports: -The sum of domestic and foreign exports. Domestic Exports : -Exports of goods that are grown, produced, or manufactured in the United States and commodities of foreign origin that have been changed in the United States, including changes made in a US Foreign Trade Zone, from the form in which they were imported, or which have been enhanced in value by further processing or manufacturing in the United States. Foreign Exports: -Exports of foreign goods (re-exports) consist of commodities of foreign origin that have previously been admitted to US Foreign Trade Zones or entered the United States for consumption, including entry into a CBP bonded warehouse, and which, at the time of exportation, are in substantially the same condition as when imported.   Note: Data is available from 2013 onward.

1) This dataset contains monthly blast furnace iron (BFI) and direct reduced iron (DRI) production data. The total for the year is not the sum of the 12 calendar months. This is because annual production is reported separately. Regional and grand totals refer to the countries listed only. Other countries report only annual - and not monthly - data. 2) World Steel Association collects Blast Furnace Iron production (BFI) from 39 countries and Direct Reduced Iron production (DRI) production from 14 countries . The 39 countries accounted for approximately 99% of total world BFI production and 14 countries accounted for 85% of total world DRI in 2015.

          TRANSLATE with xEnglishArabicHebrewPolishBulgarianHindiPortugueseCatalanHmong DawRomanianChinese SimplifiedHungarianRussianChinese TraditionalIndonesianSlovakCzechItalianSlovenianDanishJapaneseSpanishDutchKlingonSwedishEnglishKoreanThaiEstonianLatvianTurkishFinnishLithuanianUkrainianFrenchMalayUrduGermanMalteseVietnameseGreekNorwegianWelshHaitian CreolePersian  TRANSLATE with COPY THE URL BELOW BackEMBED THE SNIPPET BELOW IN YOUR SITEEnable collaborative features and customize widget: Bing Webmaster PortalBack